Roller bearings are widely used in various industries

Roller bearings in roller bearing manufacturers generally have a relatively large load-bearing capacity and can be applied to support structures with restricted installation dimensions. Before the installation of the bearing, an appropriate amount of grease is generally injected.

        Therefore, under normal circumstances, after the product is installed, the user does not need to add lubricating oil separately. The cover of the product is closed, which has achieved a sealing effect and can withstand sliding in a small axial environment. This kind of product has a relatively long service life and is highly regarded by many users.

       As the supporting roller bearing of the same kind of bearing, it can also withstand higher loads and can withstand the load pressure caused by external shocks. However, the structure of this product is more compact and diverse, and the rotation accuracy during operation is relatively high. There are more varieties on the market, and the installation is easier and simpler. In the production process of modern enterprises, it is widely used in various industries, such as machine tools, metallurgy and other industries.

       I hope that some comments can be understood in your use, and you are welcome to inquire.

The cleaning of roller bearings is divided into rough cleaning and fine cleaning: 1. In the process of using imported water pump bearings, regular cleaning is very important. How to properly clean imported water pump bearings? When the imported water pump bearing is removed for inspection, the appearance should be recorded by photography and other methods. In addition, confirm the amount of remaining smoothing agent and sample the smoothing agent, and then clean the water pump bearings.

2. The washing of the water pump bearing is divided into rough washing and fine washing, and a metal grid can be placed at the bottom of the container in use.

3. When rough washing, use a brush in oil to remove smooth grease or adhesions. At this time, if the water pump bearing is rotated in oil, be aware that the rolling surface may be damaged due to foreign matter.

4. During fine washing, gradually rotate the bearing of the water pump in the oil and stop carefully.

5. The commonly used cleaning agent is neutral non-water-containing diesel or kerosene, and sometimes warm lye is used according to the demand. No matter what kind of cleaning agent is used, always filter and insist on cleaning.

6. After cleaning, immediately apply anti-rust oil or anti-rust grease on the imported water pump bearings.