Contact: Shi Lijie +86 15851987186 (same number on WeChat)
Shi Jianlin +86 13806110378 (WeChat account)
Q Q: 657352779
Production room telephone: +86 519-86358076
General Manager Tel: +86 519-86365509
Fax: +86 519-86365069
E-mail: 657352779@qq.com
Website: en.czxmzc.com
Address: No. 98, Weijiaqiao, Niutang Industrial Park, Wujin District, Changzhou City
Needle roller bearings are roller bearings with cylindrical rollers. The rollers are thin and long relative to their diameter. This kind of roller is called a needle roller. Although the bearing has a relatively small cross-section, the bearing still has a high load-accepting ability. Therefore, the needle roller bearings produced by the company are particularly suitable for places where the radial space is restricted. The needle roller bearings produced by the company are divided into: full complement needle roller bearings, no inner ring solid needle rollers The bearing has an inner ring solid needle roller bearing.
Needle roller bearings are roller bearings with cylindrical rollers. The rollers are thin and long relative to their diameter. This kind of roller is called a needle roller. Despite having a small cross-section, the bearing still has a high load bearing capacity, needle roller bearings are equipped with thin and long rollers (roller diameter D≤5mm, L/D≥2.5, L is the length of the roller), so The radial structure is compact, and its inner diameter and load capacity are the same as other types of bearings, and the outer diameter is relatively small, which is especially suitable for supporting structures with restricted radial installation dimensions.
According to different applications, bearings without inner ring or needle roller and cage components can be selected. At this time, the journal surface and shell hole surface matching the bearing are directly used as the inner and outer rolling surfaces of the bearing to ensure the load capacity and running performance Same as the bearing with ring, the hardness, machining accuracy and surface quality of the raceway surface of the shaft or housing hole should be similar to the raceway of the bearing ring. This kind of bearing can only bear radial load.