Contact: Shi Lijie +86 15851987186 (same number on WeChat)
Shi Jianlin +86 13806110378 (WeChat account)
Q Q: 657352779
Production room telephone: +86 519-86358076
General Manager Tel: +86 519-86365509
Fax: +86 519-86365069
Address: No. 98, Weijiaqiao, Niutang Industrial Park, Wujin District, Changzhou City
Thrust needle roller and cage assembly: Thrust needle roller and cage assembly is the main component of thrust needle roller bearings. The roller needle is held and guided by radially arranged pockets. The section of the cage has a specific shape and is formed by hardened steel strips. The small size cage is made of industrial plastic.
Curved roller bearings are composed of a bolt as the inner raceway of the roller set and a thick-walled outer ring. The shoulder of the bolt shaft and the end retaining ring pressed on the bolt form the guiding surface of the outer ring along the two lateral directions. When the curved roller moves on a flat raceway or a cam plate, the internal stress of the roller increases due to the elastic deformation of the outer ring. Therefore, the rated load applied to this kind of work is selected as the column of the curve roller.
Needle roller bearings are roller bearings with cylindrical rollers. The rollers are thin and long relative to their diameter. This kind of roller is called a needle roller. Although the bearing has a small cross-section, the bearing still has a high load-accepting ability. Therefore, it is especially suitable for places where the radial space is restricted. The needle roller bearings produced by the company are divided into: full complement needle roller bearings, no inner ring solid needle rollers The bearing has an inner ring solid needle roller bearing.
Needle roller bearings are roller bearings with cylindrical rollers. The rollers are thin and long relative to their diameter. This kind of roller is called a needle roller. Despite having a small cross-section, the bearing still has a high load bearing capacity, needle roller bearings are equipped with thin and long rollers (roller diameter D≤5mm, L/D≥2.5, L is the length of the roller), so The radial structure is compact, and its inner diameter and load capacity are the same as other types of bearings, and the outer diameter is the smallest. It is especially suitable for supporting structures with restricted radial installation dimensions.
According to different applications, bearings without inner ring or needle roller and cage components can be selected. At this time, the journal surface and shell hole surface matching the bearing are directly used as the inner and outer rolling surfaces of the bearing to ensure the load capacity and running performance Same as the bearing with ring, the hardness, machining accuracy and surface quality of the raceway surface of the shaft or housing hole should be similar to the raceway of the bearing ring. This kind of bearing can only bear radial load.