The cleaning of automobile water pump bearings is divided into rough washing and fine washing.

The correct way for automobile water pump water pump bearings:

1. In the process of using imported automobile water pump bearings, regular cleaning is very important. How to properly clean imported car water pump bearings? When the imported water pump bearing is removed for inspection, the appearance should be recorded by photography and other methods. In addition, confirm the amount of remaining smoothing agent and sample the smoothing agent, and then clean the water pump bearings.

2. The washing of automobile water pump bearings is divided into rough washing and fine washing, and a metal grid can be placed at the bottom of the container used.

3. When rough washing, use a brush in oil to remove smooth grease or adhesions. At this time, if the water pump bearing is rotated in oil, be aware that the rolling surface may be damaged due to foreign matter.

4. During fine washing, gradually rotate the bearing of the water pump in the oil and stop carefully.

5. The commonly used cleaning agent is neutral non-water-containing diesel or kerosene, and sometimes warm lye is used according to the demand. No matter what kind of cleaning agent is used, always filter and insist on cleaning.

6. After cleaning, immediately apply anti-rust oil or anti-rust grease on the imported water pump bearings.