The amount of force applied during the use of the water pump bearing

The water pump bearing should avoid applying force through the rolling elements during use. The diaphragm pump is required to apply force through the inner ring when assembling and disassembling the inner ring shaft ring, and applying force through the outer ring when assembling and disassembling the outer ring.

   When force is applied through the outer ring, the magnitude of the force should be stable and even, and there should be no impact. If it is a self-priming pump, oil pressure or a tool that can apply a smooth pulling force (pressure) is required.

   If there is no alternative, hammering can be used (it is better to use a copper rod or a copper hammer for hammering). Of course, it should also be cushioned by a softer metal such as a copper sleeve instead of falling chips, so that the percussive force can be obtained as much as possible Gently.