What are the work before installation of the water pump shaft bearing?

Because of the many advantages of water pump shaft bearings, it has been widely used in automobiles and other fields. Today we will take a look at what kind of work the bearings have before installation.

   The bearing should be cleaned with kerosene or gasoline before installation, and then used after it is dry, and to ensure a good lubrication effect. Generally, the bearing can be lubricated with grease or oil. The amount of grease filled is 30%-60% of the volume of the bearing and the bearing box, and should not be too much. When using grease for lubrication, it is better to choose a grease that has no impurities, anti-rust, anti-oxidation, and extreme pressure performance.

   Note that if the water pump shaft bearing and the double-row tapered roller bearing with sealing structure have been filled with grease, they can be used directly and cannot be cleaned.

   The above is an introduction to the work that should be done before the installation of the water pump shaft bearing. For more information, please contact us!