The drag force of the installation bearing continues to the required level

Date:2018-03-20 Author: Click:

When the bearing is installed, it should be ensured that the drag force continues to the required level, and the use of rolling elements to apply force should be avoided. Ensure that the end face of the washer when installing the bearing abuts against the end face of the seat hole or the shoulder of the shaft, which not only avoids the situation of not being installed in place, but also avoids the situation of being too tight.

When the bearing diaphragm pump requires the assembly and disassembly of the shaft ring (inner ring), the force needs to be applied through the inner ring, and the force is applied through the outer ring during the assembly and disassembly of the outer ring. When installing the bearing, it is necessary to install the bearing just to the correct position. Stop applying force.